Vacuum Tube Furnace 1700 Degree C Single Zone OD100mm For Laboratory – PT D100/300/17

Vaccum Tube Furnace PT D100/300/17 Features Compact, single zone, high vacuum level and high temperature up to 1700C with MoSi2 heaters. The furnace adopts an alumina tube size OD100mm and a pair of SS304 vacuum sealing flanges with needle valves & Gauge allow heating samples under vacuum or gas flow conditions.

Send Email Chat Now
Product Overview

Vacuum Tube Furnace 1700C is mainly used in vacuum and/or atmosphere protection sintering, vacuum film coating, CVD experiments and physical components testing for rare earth preparation, electronic lighting, crystal annealing, biological ceramics, electronic ceramics, special alloy, magnetic material, precision casting and metal heat treatment. Microprocessor-based self-tuning PID provides excellent control with no overshooting and +/- 1 °C accuracy. Max vacuum level could be reached to 10E-3 torr with molecular vacuum pump. Vacuum tube furnace is an ideal tool for laboratory daily use.

Main Features
  • Tmax 1700°C
  • Single zone, Compact, Horizontal, Benchtop, Vacuum Tube Furnace
  • Dual steel structure, minium heat loss
  • Multiple gas inlets and outlets
  • Max vacuum level 10E-3 torr
  • Powerful MoSi2 heating elemets ensure uniform temperature
  • PID controller with programmable 32 segments
  • Alumina furnace tube and SS304 sealing flanges included
  • Long life type B thermocouple
  • CE standard
Safety
  • Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.
  • Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions.
  • Power failure protection resumes tubular furnace operation right after the point of failure when power is reestablished.
  • Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot
Product Designs

1700C high temp tube furnace

high temperature tube furnace

 

Technical Specifications
Model No.PT D100/300/17
Heating zoneZone length: 300mm /12″
Uniform temp zone: 140mm
Temperature uniformity +/- 5C
Power supply5KW
AC208-240V, 50/60Hz, 1 phase
Working temperatureTmax 1700°C (3092°F)
Continuously 1600°C (2912°F)
Temperature controllerYudian PID controller
Auto-tune function
Programmable 30 segments
Temperature accuracy +/- 1°C
Heating rate≤10°C / min
ThermocoupleB type
Furnace tubeMaterial: Alumina content 99.6%
Size: OD100, length 900mm
Vacuum flangesSS304 sealing flanges
Multiple gas inlets and outlets
Vacuum levelMax 10E-5 torr with molecular pump
Chamber liningMitsubishi Raw Material high alumina 1800# fiber board
Electronic componentsSchneider maker air switch, AC contactor, SSR Relay etc.
Heating elementPowerful MoSi2 rods
Shipping infoWeight: 230 kgs
W1160xL650xH960mm
ComplianceCE, ISO
WarrantyOne-year limited warranty with lifetime support
Application Notes
  • Don’t fill any explosive gasses such as Hydrogen or Methane into the vacuum tubular without necessary safety controls and supervision.
  • Vacuum Tube furnaces with alumina tubes are designed for use under vacuum and low pressure < 0.2 bars / 3 psi / 0.02 MPa.
  • Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating
Size Comparison
Item namePT D40/300/17PT D60/300/17PT D80/300/17
Heating length300mm300mm300mm
Tube sizeOD40xL900mmOD60xL900mmOD80xL900mm
Power3 KW4 KW5 KW
Weight185 KGS238 KGS276 KGS

Enquiry Now


Scroll to Top