Hybrid Muffle Furnace 1200 C for Laboratory (6″x6″x6″, 3.3L)

PH L3/12 is a newly designed small benchtop hybrid muffle furnace (6″x6″x6″, 3.3L), which intergrates a quartz processing tube with a ss304 vacuum flange and a box chamber into one. The furnace can process different samples under atmosphere or vacuum condition with Tmax 1200 degree C. Hybrid muffle furnace is a cost-effective furnace in research labs and industrial.

Send Email Chat Now
Product Overview

Hybrid muffle furnace integrates a chamber muffle furnace and a tube furnace in one, compact, light weight, easy to operate. Designs with inlet and outlet ports on the quartz tube with sealing flange attached in the chamber. A compact hybrid muffle furnace could be used for materials heat treatment processing under atmosphere or vacuum condition at a max working temperature of 1200℃, applicable for material sintering, heating preparation of Li battery, Carbon, graphene materials etc.

Main Features
  • Tmax 1200℃
  • Hybrid muffle / tube furnace, dual purpose
  • One-end closed 2″ quartz tube, a tube block, and a corresponding sealing flange and pressure gauge
  • Multiple atmosphere processes in a single cycle are possible
  • Fiber-insulated chamber for maximum temperature stability and uniformity
  • Embedded heating elements on 3 sides give an improved temperature gradient
  • Flanges support provides better sealing and longer tube life
  • Type N thermocouple. Equips two pcs, one for temperature testing, the other for protection
  • CE certified, standard
Safety Measures
  • Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.
  • Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions.
  • Power failure protection resumes furnace operation right after the point of failure when power is reestablished.
  • Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot
Picture illustration

hybrid muffle furnace

Front View for HYBRID MUFFLE FURNACE

hybrid muffle furnace

Chamber details for HYBRID MUFFLE FURNACE

 

Technical Specifications
Model No.PH L3/12
Chamber size (DxWxH)150x150x150mm /6x6x6″
Furnace tubeTube materials:Quartz
Tube size:OD50x230mm
Heating length:150mm
AtmosphereInert gases or vacuum
Power supply2KW
AC208-240V, 50/60Hz, single phase
Working temperatureTmax 1200°C (2192°F)
Continuously 1100°C (2012°F)
Temperature uniformity +/- 5C
Temperature controllerShimaden PID controller
Auto-tune function
Programmable 32 segments
Temperature accuracy +/- 1°C
Heating elementHRE resistance coil wire
Heating rate≤25°C / min
ThermocoupleN type
Equip two pcs, dual protection
Chamber liningMitsubishi Raw Material high alumina 1500# fiber board
Electronic componentsSchneider maker air switch, AC contactor, SSR Relay etc.
Shipping infoWeight: 160 kgs
W700xL970xH900mm
ComplianceCE, ISO
WarrantyOne-year limited warranty with lifetime support
Application Notes
  • However, toxic or explosive gases are not recommended for use with this hybrid muffle furnace without necessary safety controls and supervision.
  • Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating
Size Comparison
 Item PH L8/12 PH L12/12 PH L18/12
 Chamber size (WxDxH) 200x200x200mm 200X300X200mm 250X300X250mm
 Tube size(ODxL) 50x300mm 60x300mm 80x300mm
 Power 2.6 KW 3.0 KW 3.5 KW
 Furnace dimensions (LxWxH) 830x450x520mm 850x470x540mm 870x490x560mm
 Weight 58 KGS 75 KGS 80 KGS

Enquiry Now


Scroll to Top