Controlled Atmosphere Muffle Furnace 1300°C (16x16x16″ 64L)

PA L64/14 is an atmosphere muffle furnace, mainly used for material synthesis in lab or research institute. The furnace structure was built in dual steel case, sealing type, which makes it could be working under Vacuum, Nitrogen and other inert gases atmosphere situation, and the chamber insulated with 1600# high quality alumina lining board and equip a 310S box inside prevents corrosive gas from erosion the chamber, heating elements are powerful SiC rods, the temperature is controlled by Shimaden digital controller with accuracy ±1°C and many segments programmable up to 1400°C.

Send Email Chat Now
Product Overview

Atmosphere Muffle Furnace provides an environment for various purpose in many heat treatment experiments, providing the controlled temperature and atmosphere specific projects require. The controlled atmosphere ensure to complete tasks that require suitable temperatures. This is the best way to ensure the successful outcome of your project because it is sealed tightly to ensure the proper environment.
One of the main components of the atmosphere furnace is the correct mixture of gases. The precise measurement of each gas is essential to the success of your project. You can use a separate chamber to mix the gases, which are then pumped into the furnace chamber where the work will be completed when they are done mixing. It is essential that the separate chamber that holds the gases does not receive any outside air because it could throw off the gas mixture and render your project useless.

Main Features
  • Tmax 1400°C
  • Dual steel structure, air tight chamber
  • Multiple gas inlets and outlets with stainless steel ball valves
  • Dual door design, sealing with silicon gasket
  • 310SS box inside prevents corrosive gases from erosion the ceramic fiber chamber
  • Equip a water circulation device for furnace cooling
  • SiC heaters heating from 2 sides
  • Precise PID controller with progrmmable 32 segments
  • Long life type S thermocouple
  • CE standard
Safety Measures
  • Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.
  • Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions
  • Power failure protection resumes furnace operation right after the point of failure when power is reestablished
  • Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot
Product illustration for Atmosphere Muffle Furnace

1400 atmosphere furnace1400 atmosphere furnace

Front View for Atmosphere Muffle Furnace 1300 degree C 64L

 

Technical Specifications
Model No.PA L64/14
Chamber size (DxWxH)400x400x400mm /16x16x16″
Capacity: 64 Liters
Power supply18KW
AC380V, 50/60Hz, 3 phases
Working temperatureTmax 1400°C (2552°F)
Continuously 1300°C (2372°F)
Temperature controllerShimaden PID controller
Auto-tune function
Programmable 32 segments
Temperature accuracy +/- 1°C
Gas port1/4″ hose barb
Working environmentsAir, inert gases, rough vacuum
Gas PressureNot to exceed 0.03 MPa / 150 torr / 3 psi
Vacuum levelMax 20000Pa
Heating rate≤25°C / min
Heating elementSiC (U shape, 8pcs)
ThermocoupleS type
Chamber liningMitsubishi Raw Material high alumina 1600# fiber board
Electronic componentsSchneider maker air switch, AC contactor, SSR Relay etc.
Shipping infoWeight: 560 kgs
W1140*L1160*H2050mm
ComplianceCE, ISO
WarrantyOne-year limited warranty with lifetime support
Application Notes
  • However, toxic or explosive gasses are not recommended for use with atmosphere muffle furnace without necessary safety controls and supervision.
  • Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating
  • Ultimate vacuum level for PQ Atmosphere muffle furnace is around 20000 Pa with hose barb connections. Please keep in mind that our PQ atmosphere furnaces are NOT designed to be vacuum furnaces, the vacuuming part is mainly for users to pre-vac the chamber, before putting in inert or other protective gases, if you have special request on vacuum level, please order our professional vacuum furnaces.
Size Comparison
Item namePA L3/14PA L12/14PA L36/14
Inner size (DxWxH)150x150x150mm300x200x200mm400x300x300mm
Capacity3 L12 L36 L
Power4 KW6 KW13 KW
Overall dimensions (LxWxH)560x760x1310mm700x810x1360mm800x920x1450mm
Weight290 KGS356 KGS460 KGS

Enquiry Now


Scroll to Top